Build - Design - Jump Inside
Basket 0

How to build a Bat Mobile

How to build a Bat Mobile using a Stickibox Car Kit

What you will need:

1 Stickibox Car Kit     

1 Roll of Black Craft Paper

1 Sheet of Yellow Card

Felt Tip Pens


Spray glue

Glue Stick


Step 1: Cover the box

Make your Stickibox cardboard car by following the instructions inside the pack.

Once the box is constructed, measure out a 580mm x 360mm rectangle on the black craft paper and cut out. Duplicate this so that you have two rectangles of black paper to cover the sides of the box.

Next, measure out a 360mm x 360mm square on the black paper and cut out. Duplicate this so that you have two squares to cover the ends of the box.

Spray the long side with spray glue and carefully apply the black paper. Continue this around the box so that all sides are covered in black paper.


Step 2: Attach the wheels

Remove the cardboard wheels and steering wheels from the sheets and attach to the box using the rivets provided.


Step 3: Attach the headlights

Take the sticker sheet with the headlights and colour around the lights with a yellow pen. Once coloured in, simply attach to the front of your bat mobile.


Step 4: Attach the number plates

Using a black felt tip pen, write a name on the number plates and attach to the front and back of the vehicle


Step 5: Make and attach the batman logos

Take the two circle shaped stickers and draw the outline of the batman logo. We used a logo found via Google Images. Colour in the two logos and attach the stickers to the sides of your vehicle.

For the front of the vehicle, draw another bat logo on a piece of black paper and cut out. Fix the black bat logo onto the yellow card and cut out in an oval shape. Using the stick glue, attach this badge to the front of the vehicle.


Step 6: Start your engines!

If you would like to drive your bat mobile, carefully remove the base of the box along the perforated lines. The handles will now be covered by the black paper, so simply score through the paper where the handle edges are cut out and push the paper and handle through.  

Step inside your car holding the box at waist height. Start your engines and get ready to save the world!


Older Post Newer Post